Supporting Samples AC Valve Core Remover Installer and Repair Tool Set

• Warranty: One Year
• Type: Auto Repair Kit
• Standard: Nonstandard
• Certification: CE
• Condition: New
• Transport Package: Box
• Model NO.: REP03
• Specification: REP03
• Trademark: N/A
• Origin: Zhejiang
• Production Capacity: 30000

Product Description

Product Description

Automotive AC R134A R1234YF Valve Core Remover and Installer Tool Set, for Standard and JRA Valve Core Couplers

• Professional AC charging port valve core remover and installer set
• Compatible with standard, JRA and schrader valves. but you will need to use a dab of vacuum grease on the end of the probe to insure that the schrader valve stays attached to it during core removal.
• Will work on both R134A and R1234YF automotive air conditioner systems
• Come with every thing you need for a fast and effective valve core replacement job
• Organized in an impact abs case for easy storag

 

• Package Include:

• 2 x Valve Core Tool
• 2 x R134A/R22 Adapter
• 2 x R1234YF Adapter
• 3 x Valve Core
• 2 x O Ring

 

VALVE CORE REMOVAL

1. Turn Valve Lever in the direction of flow so the shaft can go through the body.

2. Connect the valve core to the service port of the system.

3. Push the shaft towards the service port. Slowly and carefully rotate the shaft until the tip of the shaft engages the body of the valve core.

4. Rotate the shaft counter-clockwise by turning the shaft knob.

WARNING: MAKE SURE THE SHAFT CONNECTION NUT DOES NOT START TO TURN AS YOU ARE TURNING THE SHAFT. THIS COULD CAUSE THE SHAFT CONNECTION NUT TO LOOSEN AND REFRIGERANT WOULD LEAK OUT!

5. Continue rotating the shaft knob until you cannot turn the shaft anymore. DO NOT FORCE!

6. With the shaft pulled out all the way, CLOSE THE VALVE. (Valve Lever perpendicular to the direction of FLOW)

WARNING: FAILURE TO CLOSE VALVE COULD CAUSE INJURY AND WOULD RESULT IN A LOSS OF REFRIGERANT!

7. Loosen and remove the shaft connection nut from the valve body.

8. Remove the damaged valve core.

 

VALVE CORE INSTALLATION

1. Insert the new valve core onto the tip of the shaft.

2. Tighten the shaft connection nut to the valve body.

3. Turn Valve Lever in the direction of flow so the shaft can go through the body.

4. Turn the shaft clockwise until the valve core is installed completely.

5. Once the valve core is in place, pull the shaft back and close the valve.

6. Remove the shaft from the valve body.

7. SLOWLY open the valve knob to assure the valve core is in place. If the valve is in place, the pressure in the tool will dissipate quickly. If the valve core is not in place, quickly close the valve and try again.

Packaging & Shipping

Company Profile

Our Advantages

FAQ